CarrierConfigManager

ACTION_CARRIER_CONFIG_CHANGED

static val ACTION_CARRIER_CONFIG_CHANGED: String

This intent is broadcast by the system when carrier config changes. An int is specified in EXTRA_SLOT_INDEX to indicate the slot index that this is for. An optional int extra EXTRA_SUBSCRIPTION_INDEX is included to indicate the subscription index if a valid one is available for the slot index. An optional int extra TelephonyManager#EXTRA_CARRIER_ID is included to indicate the carrier id for the changed carrier configuration. An optional int extra TelephonyManager#EXTRA_SPECIFIC_CARRIER_ID is included to indicate the precise carrier id for the changed carrier configuration.

Value: "android.telephony.action.CARRIER_CONFIG_CHANGED"

CARRIER_NR_AVAILABILITY_NSA

static val CARRIER_NR_AVAILABILITY_NSA: Int

Indicates CARRIER_NR_AVAILABILITY_NSA determine that the carrier enable the non-standalone (NSA) mode of 5G NR.

Value: 1

CARRIER_NR_AVAILABILITY_SA

static val CARRIER_NR_AVAILABILITY_SA: Int

Indicates CARRIER_NR_AVAILABILITY_SA determine that the carrier enable the standalone (SA) mode of 5G NR.

Value: 2

CROSS_SIM_SPN_FORMAT_CARRIER_NAME_ONLY

static val CROSS_SIM_SPN_FORMAT_CARRIER_NAME_ONLY: Int

Specifies SPN format of displaying carrier name only.

Value: 0

CROSS_SIM_SPN_FORMAT_CARRIER_NAME_WITH_BRANDING

static val CROSS_SIM_SPN_FORMAT_CARRIER_NAME_WITH_BRANDING: Int

Specifies SPN format of displaying carrier name along with "Cross-SIM calling".

Value: 1

DATA_CYCLE_THRESHOLD_DISABLED

static val DATA_CYCLE_THRESHOLD_DISABLED: Int

Flag indicating that a data cycle threshold should be disabled.

If KEY_DATA_WARNING_THRESHOLD_BYTES_LONG is set to this value, the platform's default data warning, if one exists, will be disabled. A user selected data warning will not be overridden.

If KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG is set to this value, the platform's default data limit, if one exists, will be disabled. A user selected data limit will not be overridden.

Value: -2

DATA_CYCLE_USE_PLATFORM_DEFAULT

static val DATA_CYCLE_USE_PLATFORM_DEFAULT: Int

When KEY_MONTHLY_DATA_CYCLE_DAY_INT, KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG, or KEY_DATA_WARNING_THRESHOLD_BYTES_LONG are set to this value, the platform default value will be used for that key.

Value: -1

ENABLE_EAP_METHOD_PREFIX_BOOL

static val ENABLE_EAP_METHOD_PREFIX_BOOL: String

Specifies whether the system should prefix the EAP method to the anonymous identity. The following prefix will be added if this key is set to TRUE: EAP-AKA: "0" EAP-SIM: "1" EAP-AKA_PRIME: "6"

Value: "enable_eap_method_prefix_bool"

EXTRA_REBROADCAST_ON_UNLOCK

static val EXTRA_REBROADCAST_ON_UNLOCK: String

ACTION_CARRIER_CONFIG_CHANGED is broadcast once on device bootup and then again when the device is unlocked. Direct-Boot-aware applications may use the first broadcast as an early signal that the carrier config has been loaded, but other applications will only receive the second broadcast, when the device is unlocked. This extra is included in ACTION_CARRIER_CONFIG_CHANGED to indicate whether this is a rebroadcast on unlock.

Value: "android.telephony.extra.REBROADCAST_ON_UNLOCK"

EXTRA_SLOT_INDEX

static val EXTRA_SLOT_INDEX: String

Extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the slot index that the broadcast is for.

Value: "android.telephony.extra.SLOT_INDEX"

EXTRA_SUBSCRIPTION_INDEX

static val EXTRA_SUBSCRIPTION_INDEX: String

Optional extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the subscription index that the broadcast is for, if a valid one is available.

Value: "android.telephony.extra.SUBSCRIPTION_INDEX"

IMSI_KEY_AVAILABILITY_INT

static val IMSI_KEY_AVAILABILITY_INT: String

Identifies if the key is available for WLAN or EPDG or both. The value is a bitmask. 0 indicates that neither EPDG or WLAN is enabled. 1 indicates that key type TelephonyManager#KEY_TYPE_EPDG is enabled. 2 indicates that key type TelephonyManager#KEY_TYPE_WLAN is enabled. 3 indicates that both are enabled.

Value: "imsi_key_availability_int"

KEY_5G_NR_SSRSRP_THRESHOLDS_INT_ARRAY

static val KEY_5G_NR_SSRSRP_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS reference signal received power (SSRSRP) thresholds.

Reference: 3GPP TS 38.215

4 threshold integers must be within the boundaries [-140 dB, -44 dB], and the levels are:

• "NONE: [-140, threshold1)"
• "POOR: [threshold1, threshold2)"
• "MODERATE: [threshold2, threshold3)"
• "GOOD: [threshold3, threshold4)"
• "EXCELLENT: [threshold4, -44]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_ssrsrp_thresholds_int_array"

KEY_5G_NR_SSRSRQ_THRESHOLDS_INT_ARRAY

static val KEY_5G_NR_SSRSRQ_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS reference signal received quality (SSRSRQ) thresholds.

Reference: 3GPP TS 38.215; 3GPP TS 38.133 section 10

4 threshold integers must be within the boundaries [-43 dB, 20 dB], and the levels are:

• "NONE: [-43, threshold1)"
• "POOR: [threshold1, threshold2)"
• "MODERATE: [threshold2, threshold3)"
• "GOOD: [threshold3, threshold4)"
• "EXCELLENT: [threshold4, 20]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_ssrsrq_thresholds_int_array"

KEY_5G_NR_SSSINR_THRESHOLDS_INT_ARRAY

static val KEY_5G_NR_SSSINR_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS signal-to-noise and interference ratio (SSSINR) thresholds.

Reference: 3GPP TS 38.215, 3GPP TS 38.133 10.1.16.1

4 threshold integers must be within the boundaries [-23 dB, 40 dB], and the levels are:

• "NONE: [-23, threshold1)"
• "POOR: [threshold1, threshold2)"
• "MODERATE: [threshold2, threshold3)"
• "GOOD: [threshold3, threshold4)"
• "EXCELLENT: [threshold4, 40]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_sssinr_thresholds_int_array"

KEY_ADDITIONAL_CALL_SETTING_BOOL

static val KEY_ADDITIONAL_CALL_SETTING_BOOL: String

Does not display additional call setting for IMS phone based on GSM Phone

Value: "additional_call_setting_bool"

KEY_ADDITIONAL_SETTINGS_CALLER_ID_VISIBILITY_BOOL

static val KEY_ADDITIONAL_SETTINGS_CALLER_ID_VISIBILITY_BOOL: String

Boolean indicating if the "Caller ID" item is visible in the Additional Settings menu. true means visible. false means gone. The default value is true.

Value: "additional_settings_caller_id_visibility_bool"

KEY_ADDITIONAL_SETTINGS_CALL_WAITING_VISIBILITY_BOOL

static val KEY_ADDITIONAL_SETTINGS_CALL_WAITING_VISIBILITY_BOOL: String

Boolean indicating if the "Call Waiting" item is visible in the Additional Settings menu. true means visible. false means gone. The default value is true.

Value: "additional_settings_call_waiting_visibility_bool"

KEY_ALLOW_ADDING_APNS_BOOL

static val KEY_ALLOW_ADDING_APNS_BOOL: String

Allow user to add APNs

Value: "allow_adding_apns_bool"

KEY_ALLOW_ADD_CALL_DURING_VIDEO_CALL_BOOL

static val KEY_ALLOW_ADD_CALL_DURING_VIDEO_CALL_BOOL: String

When true, indicates that adding a call is disabled when there is an ongoing video call or when there is an ongoing call on wifi which was downgraded from video and VoWifi is turned off.

Value: "allow_add_call_during_video_call"

KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL

static val KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL: String

Determines if the current device should allow emergency numbers to be logged in the Call Log. (Some carriers require that emergency calls *not* be logged, presumably to avoid the risk of accidental redialing from the call log UI. This is a good idea, so the default here is false.)

Value: "allow_emergency_numbers_in_call_log_bool"

KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL

static val KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL: String

Flag indicating whether to allow carrier video calls to emergency numbers. When true, video calls to emergency numbers will be allowed. When false, video calls to emergency numbers will be initiated as audio-only calls instead.

Value: "allow_emergency_video_calls_bool"

KEY_ALLOW_HOLD_CALL_DURING_EMERGENCY_BOOL

static val KEY_ALLOW_HOLD_CALL_DURING_EMERGENCY_BOOL: String

Flag indicating whether or not an ongoing call will be held when an outgoing emergency call is placed. If true, ongoing calls will be put on hold when an emergency call is placed. If false, placing an emergency call will trigger the disconnect of all ongoing calls before the emergency call is placed.

Value: "allow_hold_call_during_emergency_bool"

KEY_ALLOW_HOLD_VIDEO_CALL_BOOL

static val KEY_ALLOW_HOLD_VIDEO_CALL_BOOL: String

When true, indicates that video calls can be put on hold in order to swap to another call (e.g. a new outgoing call). When false, indicates that video calls will be disconnected when swapping to another call.

This is true by default.

Value: "allow_hold_video_call_bool"

KEY_ALLOW_LOCAL_DTMF_TONES_BOOL

static val KEY_ALLOW_LOCAL_DTMF_TONES_BOOL: String

Determine whether we want to play local DTMF tones in a call, or just let the radio/BP handle playing of the tones.

Value: "allow_local_dtmf_tones_bool"

KEY_ALLOW_MERGE_WIFI_CALLS_WHEN_VOWIFI_OFF_BOOL

static val KEY_ALLOW_MERGE_WIFI_CALLS_WHEN_VOWIFI_OFF_BOOL: String

Flag indicating whether the carrier supports merging wifi calls when VoWIFI is disabled. This can happen in the case of a carrier which allows offloading video calls to WIFI separately of whether voice over wifi is enabled. In such a scenario when two video calls are downgraded to voice, they remain over wifi. However, if VoWIFI is disabled, these calls cannot be merged.

Value: "allow_merge_wifi_calls_when_vowifi_off_bool"

KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL

static val KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL: String

Determines whether the carrier supports making non-emergency phone calls while the phone is in emergency callback mode. Default value is true, meaning that non-emergency calls are allowed in emergency callback mode.

Value: "allow_non_emergency_calls_in_ecm_bool"

KEY_ALLOW_VIDEO_CALLING_FALLBACK_BOOL

static val KEY_ALLOW_VIDEO_CALLING_FALLBACK_BOOL: String

Whether system apps are allowed to use fallback if carrier video call is not available. Defaults to true.

Value: "allow_video_calling_fallback_bool"

KEY_ALWAYS_SHOW_DATA_RAT_ICON_BOOL

static val KEY_ALWAYS_SHOW_DATA_RAT_ICON_BOOL: String

Boolean indicating if show data RAT icon on status bar even when data is disabled.

Value: "always_show_data_rat_icon_bool"

KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL

static val KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL: String

Deprecated: The allow alerts option is always shown now. No longer need a config for that.

The default flag specifying whether "Allow alerts" option will be always shown in emergency alerts settings regardless developer options is turned on or not.

Value: "always_show_emergency_alert_onoff_bool"

KEY_ALWAYS_SHOW_PRIMARY_SIGNAL_BAR_IN_OPPORTUNISTIC_NETWORK_BOOLEAN

static val KEY_ALWAYS_SHOW_PRIMARY_SIGNAL_BAR_IN_OPPORTUNISTIC_NETWORK_BOOLEAN: String

Indicates when a carrier has a primary subscription and an opportunistic subscription active, and when Internet data is switched to opportunistic network, whether to still show signal bar of primary network. By default it will be false, meaning whenever data is going over opportunistic network, signal bar will reflect signal strength and rat icon of that network.

Value: "always_show_primary_signal_bar_in_opportunistic_network_boolean"

KEY_APN_EXPAND_BOOL

static val KEY_APN_EXPAND_BOOL: String

Control whether users can edit APNs in Settings.

Value: "apn_expand_bool"

KEY_APN_SETTINGS_DEFAULT_APN_TYPES_STRING_ARRAY

static val KEY_APN_SETTINGS_DEFAULT_APN_TYPES_STRING_ARRAY: String

Default value of APN types field if not specified by user when adding/modifying an APN.

Value: "apn_settings_default_apn_types_string_array"

KEY_AUTO_RETRY_ENABLED_BOOL

static val KEY_AUTO_RETRY_ENABLED_BOOL: String

Flag indicating if auto retry is enabled

Value: "auto_retry_enabled_bool"

KEY_CALL_BARRING_DEFAULT_SERVICE_CLASS_INT

static val KEY_CALL_BARRING_DEFAULT_SERVICE_CLASS_INT: String

Specifies the service class for call barring service. Default value is SERVICE_CLASS_VOICE. The value set as below:

• 0: SERVICE_CLASS_NONE
• 1: SERVICE_CLASS_VOICE

Value: "call_barring_default_service_class_int"

KEY_CALL_BARRING_SUPPORTS_DEACTIVATE_ALL_BOOL

static val KEY_CALL_BARRING_SUPPORTS_DEACTIVATE_ALL_BOOL: String

Flag indicating whether or not deactivating all call barring features via the "Call Barring" settings menu is supported. If true, the option will be visible in the "Call Barring" settings menu. If false, the option will not be visible. Enabled by default.

Value: "call_barring_supports_deactivate_all_bool"

KEY_CALL_BARRING_SUPPORTS_PASSWORD_CHANGE_BOOL

static val KEY_CALL_BARRING_SUPPORTS_PASSWORD_CHANGE_BOOL: String

Flag indicating whether or not changing the call barring password via the "Call Barring" settings menu is supported. If true, the option will be visible in the "Call Barring" settings menu. If false, the option will not be visible. Enabled by default.

Value: "call_barring_supports_password_change_bool"

KEY_CALL_BARRING_VISIBILITY_BOOL

static val KEY_CALL_BARRING_VISIBILITY_BOOL: String

Boolean indicating if the "Call barring" item is visible in the Call Settings menu. If true, the "Call Barring" menu will be visible. If false, the menu will be gone. Disabled by default.

Value: "call_barring_visibility_bool"

KEY_CALL_COMPOSER_PICTURE_SERVER_URL_STRING

static val KEY_CALL_COMPOSER_PICTURE_SERVER_URL_STRING: String

Indicates the carrier server url that serves the call composer picture.

Value: "call_composer_picture_server_url_string"

KEY_CALL_FORWARDING_BLOCKS_WHILE_ROAMING_STRING_ARRAY

static val KEY_CALL_FORWARDING_BLOCKS_WHILE_ROAMING_STRING_ARRAY: String

An array containing custom call forwarding number prefixes that will be blocked while the device is reporting that it is roaming. By default, there are no custom call forwarding prefixes and none of these numbers will be filtered. If one or more entries are present, the system will not complete the call and display an error message. To display a message to the user when call forwarding fails for 3gpp MMI codes while roaming, use the KEY_SUPPORT_3GPP_CALL_FORWARDING_WHILE_ROAMING_BOOL option instead.

Value: "call_forwarding_blocks_while_roaming_string_array"

KEY_CALL_REDIRECTION_SERVICE_COMPONENT_NAME_STRING

static val KEY_CALL_REDIRECTION_SERVICE_COMPONENT_NAME_STRING: String

Specifies a carrier-defined android.telecom.CallRedirectionService which Telecom will bind to for outgoing calls. An empty string indicates that no carrier-defined android.telecom.CallRedirectionService is specified.

Value: "call_redirection_service_component_name_string"

KEY_CAPABILITIES_EXEMPT_FROM_SINGLE_DC_CHECK_INT_ARRAY

static val KEY_CAPABILITIES_EXEMPT_FROM_SINGLE_DC_CHECK_INT_ARRAY: String

Only apply if KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY specifies the network types that support a single data connection at a time. This key defines a list of network capabilities which, if requested, will exempt the request from single data connection checks.

Value: "capabilities_exempt_from_single_dc_check_int_array"

KEY_CARRIER_ALLOW_DEFLECT_IMS_CALL_BOOL

static val KEY_CARRIER_ALLOW_DEFLECT_IMS_CALL_BOOL: String

Flag indicating whether the carrier supports call deflection for an incoming IMS call.

Value: "carrier_allow_deflect_ims_call_bool"

KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL

static val KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL: String

Flag specifying whether IMS service can be turned off. If false then the service will not be turned-off completely, but individual features can be disabled.

Value: "carrier_allow_turnoff_ims_bool"

KEY_CARRIER_APP_REQUIRED_DURING_SIM_SETUP_BOOL

static val KEY_CARRIER_APP_REQUIRED_DURING_SIM_SETUP_BOOL: String

Determines whether the carrier app needed to be involved when users try to finish setting up the SIM card to get network service.

Value: "carrier_app_required_during_setup_bool"

KEY_CARRIER_CALL_SCREENING_APP_STRING

static val KEY_CARRIER_CALL_SCREENING_APP_STRING: String

The Component Name of a carrier-provided CallScreeningService implementation. Telecom will bind to android.telecom.CallScreeningService for ALL incoming calls and provide the carrier CallScreeningService with the opportunity to allow or block calls.

The String includes the package name/the class name. Example: com.android.carrier/com.android.carrier.callscreeningserviceimpl

Using ComponentName#flattenToString() to convert a ComponentName object to String. Using ComponentName#unflattenFromString(String) to convert a String object to a ComponentName.

Value: "call_screening_app"

KEY_CARRIER_CERTIFICATE_STRING_ARRAY

static val KEY_CARRIER_CERTIFICATE_STRING_ARRAY: String

Holds the list of carrier certificate hashes, followed by optional package names. Format: "sha1/256" or "sha1/256:package1,package2,package3..." Note that each carrier has its own hashes.

Value: "carrier_certificate_string_array"

KEY_CARRIER_CONFIG_APPLIED_BOOL

static val KEY_CARRIER_CONFIG_APPLIED_BOOL: String

Determines whether any carrier has been identified and its specific config has been applied, default to false.

Value: "carrier_config_applied_bool"

KEY_CARRIER_CONFIG_VERSION_STRING

static val KEY_CARRIER_CONFIG_VERSION_STRING: String

Specifies a value that identifies the version of the carrier configuration that is currently in use. This string is displayed on the UI. The format of the string is not specified.

Value: "carrier_config_version_string"

KEY_CARRIER_CROSS_SIM_IMS_AVAILABLE_BOOL

static val KEY_CARRIER_CROSS_SIM_IMS_AVAILABLE_BOOL: String

Flag specifying whether Cross SIM over IMS should be available for carrier. When false the carrier does not support cross SIM calling. When true the carrier does support cross sim calling, where available

Value: "carrier_cross_sim_ims_available_bool"

KEY_CARRIER_DATA_CALL_PERMANENT_FAILURE_STRINGS

static val KEY_CARRIER_DATA_CALL_PERMANENT_FAILURE_STRINGS: String

Deprecated: This API key was added in mistake and is not used anymore by the telephony data frameworks.

Data call setup permanent failure causes by the carrier.

Value: "carrier_data_call_permanent_failure_strings"

KEY_CARRIER_DEFAULT_ACTIONS_ON_DCFAILURE_STRING_ARRAY

static val KEY_CARRIER_DEFAULT_ACTIONS_ON_DCFAILURE_STRING_ARRAY: String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_REQUEST_NETWORK_FAILED and configured signal args: android.telephony.TelephonyManager#EXTRA_APN_TYPE, android.telephony.TelephonyManager#EXTRA_ERROR_CODE used for customization of the default carrier app Format: { "APN_1, ERROR_CODE_1 : CARRIER_ACTION_IDX_1, CARRIER_ACTION_IDX_2...", "APN_1, ERROR_CODE_2 : CARRIER_ACTION_IDX_1 " } Where APN_1 is an integer defined in android.telephony.data.ApnSetting (e.g. android.telephony.data.ApnSetting#TYPE_DEFAULT ERROR_CODE_1 is an integer defined in android.telephony.DataFailCause Example: android.telephony.DataFailCause#MISSING_UNKNOWN_APN CARRIER_ACTION_IDX_1 is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_DISABLE_METERED_APNS disables metered APNs

Value: "carrier_default_actions_on_dcfailure_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_DEFAULT_NETWORK_AVAILABLE

static val KEY_CARRIER_DEFAULT_ACTIONS_ON_DEFAULT_NETWORK_AVAILABLE: String

Defines carrier-specific actions which act upon com.android.internal.telephony.CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE, used for customization of the default carrier app. Format: { "true : CARRIER_ACTION_IDX_1", "false: CARRIER_ACTION_IDX_2" } Where true is a boolean indicates default network available/unavailable Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_ENABLE_DEFAULT_URL_HANDLER enables the app as the default URL handler

Value: "carrier_default_actions_on_default_network_available_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_REDIRECTION_STRING_ARRAY

static val KEY_CARRIER_DEFAULT_ACTIONS_ON_REDIRECTION_STRING_ARRAY: String

Defines carrier-specific actions which act upon com.android.internal.telephony.CARRIER_SIGNAL_REDIRECTED, used for customization of the default carrier app. Format: "CARRIER_ACTION_IDX, ..." Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_DISABLE_METERED_APNS disables metered APNs

Value: "carrier_default_actions_on_redirection_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_RESET

static val KEY_CARRIER_DEFAULT_ACTIONS_ON_RESET: String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_RESET, used for customization of the default carrier app. Format: "CARRIER_ACTION_IDX, ..." Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_CANCEL_ALL_NOTIFICATIONS clears all notifications on reset

Value: "carrier_default_actions_on_reset_string_array"

KEY_CARRIER_DEFAULT_REDIRECTION_URL_STRING_ARRAY

static val KEY_CARRIER_DEFAULT_REDIRECTION_URL_STRING_ARRAY: String

Defines a list of acceptable redirection url for default carrier app.

Value: "carrier_default_redirection_url_string_array"

KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL

static val KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL: String

Default WFC_IMS_enabled: true VoWiFi by default is on false VoWiFi by default is off

Value: "carrier_default_wfc_ims_enabled_bool"

KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT

static val KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT: String

Default mode for WFC over IMS on home network:

• 0: Wi-Fi only
• 1: prefer mobile network
• 2: prefer Wi-Fi

Value: "carrier_default_wfc_ims_mode_int"

KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT

static val KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT: String

Default mode for WFC over IMS on roaming network. See KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT for meaning of values.

Value: "carrier_default_wfc_ims_roaming_mode_int"

KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL

static val KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL: String

Deprecated: Use com.android.cellbroadcastreceiver.CellBroadcastReceiver resource show_test_settings to control whether to show test alert settings or not.

The default flag specifying whether ETWS/CMAS test setting is forcibly disabled in Settings->More->Emergency broadcasts menu even though developer options is turned on.

Value: "carrier_force_disable_etws_cmas_test_bool"

KEY_CARRIER_IMS_GBA_REQUIRED_BOOL

static val KEY_CARRIER_IMS_GBA_REQUIRED_BOOL: String

Flag specifying whether Generic Bootstrapping Architecture capable SIM is required for IMS.

Value: "carrier_ims_gba_required_bool"

KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL

static val KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL: String

Flag specifying whether IMS instant lettering is available for the carrier. True if instant lettering is available for the carrier, false otherwise.

Value: "carrier_instant_lettering_available_bool"

KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING

static val KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the character encoding which will be used when determining the length of messages. Used in the InCall UI to limit the number of characters the user may type. If empty-string, the instant lettering message size limit will be enforced on a 1:1 basis. That is, each character will count towards the messages size limit as a single byte. If a character encoding is specified, the message size limit will be based on the number of bytes in the message per the specified encoding.

Value: "carrier_instant_lettering_encoding_string"

KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING

static val KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines a list of characters which must be escaped with a backslash '\' character. Should be specified as a string containing the characters to be escaped. For example to escape quote and backslash the string would be a quote and a backslash.

Value: "carrier_instant_lettering_escaped_chars_string"

KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING

static val KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the list of characters which may not be contained in messages. Should be specified as a regular expression suitable for use with String#matches(String).

Value: "carrier_instant_lettering_invalid_chars_string"

KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT

static val KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), the length limit for messages. Used in the InCall UI to ensure the user cannot enter more characters than allowed by the carrier. See also KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING for more information on how the length of the message is calculated.

Value: "carrier_instant_lettering_length_limit_int"

KEY_CARRIER_METERED_APN_TYPES_STRINGS

static val KEY_CARRIER_METERED_APN_TYPES_STRINGS: String

A string array indicating the default APN types that are metered by the carrier. The string in the array is the name of the APN type. For example, "default" for ApnSetting#TYPE_DEFAULT, "mms" for ApnSetting#TYPE_MMS, etc. The default value is {"default", "mms", "dun", "supl"}.

Value: "carrier_metered_apn_types_strings"

KEY_CARRIER_METERED_ROAMING_APN_TYPES_STRINGS

static val KEY_CARRIER_METERED_ROAMING_APN_TYPES_STRINGS: String

A string array indicating the default APN types that are roaming-metered by the carrier. The string in the array is the name of the APN type. For example, "default" for ApnSetting#TYPE_DEFAULT, "mms" for ApnSetting#TYPE_MMS, etc. The default value is {"default", "mms", "dun", "supl"}.

Value: "carrier_metered_roaming_apn_types_strings"

KEY_CARRIER_NAME_OVERRIDE_BOOL

static val KEY_CARRIER_NAME_OVERRIDE_BOOL: String

Unconditionally override the carrier name string using #KEY_CARRIER_NAME_STRING. If true, then the carrier name string will be #KEY_CARRIER_NAME_STRING, unconditionally.

If false, then the override will be performed conditionally and the #KEY_CARRIER_NAME_STRING will have the lowest-precedence; it will only be used in the event that the name string would otherwise be empty, allowing it to serve as a last-resort. If used, this value functions in place of the SPN on any/all ICC records for the corresponding subscription.

Value: "carrier_name_override_bool"

KEY_CARRIER_NAME_STRING

static val KEY_CARRIER_NAME_STRING: String

String to identify carrier name in CarrierConfig app. This string overrides SPN if #KEY_CARRIER_NAME_OVERRIDE_BOOL is true; otherwise, it will be used if its value is provided and SPN is unavailable

Value: "carrier_name_string"

KEY_CARRIER_NR_AVAILABILITIES_INT_ARRAY

static val KEY_CARRIER_NR_AVAILABILITIES_INT_ARRAY: String

A list of carrier nr availability is used to determine whether the carrier enable the non-standalone (NSA) mode of 5G NR, standalone (SA) mode of 5G NR

The value of list is CARRIER_NR_AVAILABILITY_NSA, or CARRIER_NR_AVAILABILITY_SA.

For example, if both NSA and SA are used, the list value is { CARRIER_NR_AVAILABILITY_NSA,CARRIER_NR_AVAILABILITY_SA}. If the carrier doesn't support 5G NR, the value is the empty array. If the key is invalid or not configured, the default value { CARRIER_NR_AVAILABILITY_NSA,CARRIER_NR_AVAILABILITY_SA} will apply.

Value: "carrier_nr_availabilities_int_array"

KEY_CARRIER_PROVISIONS_WIFI_MERGED_NETWORKS_BOOL

static val KEY_CARRIER_PROVISIONS_WIFI_MERGED_NETWORKS_BOOL: String

Indicates whether or not the carrier will provision merged carrier Wi-Fi offload networks. Such networks are considered part of the core carrier network. This configuration will be use to gate whether such configurations are allowed to the carrier and correspondingly enable UI elements which are required for such configurations.

Value: "carrier_provisions_wifi_merged_networks_bool"

KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL

static val KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL: String

Flag specifying whether provisioning is required for RCS.

Value: "carrier_rcs_provisioning_required_bool"

KEY_CARRIER_SERVICE_NAME_STRING_ARRAY

static val KEY_CARRIER_SERVICE_NAME_STRING_ARRAY: String

String array containing the list of names for service numbers provided by carriers. This key should be used with KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY. The names provided in this array will be mapped 1:1 with the numbers provided in the KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY array.

The data would be considered valid if and only if:

• The number of items in both the arrays are equal
• The data added to the KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY array is valid. See KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY for more information.

Example:

<code>&lt;string-array name="carrier_service_name_array" num="2"&gt;
    &lt;item value="Police"/&gt;
    &lt;item value="Ambulance"/&gt;
  &lt;/string-array&gt;
  </code>

Value: "carrier_service_name_array"

KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY

static val KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY: String

String array containing the list of service numbers provided by carriers. This key should be used with KEY_CARRIER_SERVICE_NAME_STRING_ARRAY. The numbers provided in this array will be mapped 1:1 with the names provided in the KEY_CARRIER_SERVICE_NAME_STRING_ARRAY array.

The data would be considered valid if and only if:

• The number of items in both the arrays are equal
• The item should contain dialable characters only which includes 0-9, -, *, #, (, ), SPACE.

Example:

<code>&lt;string-array name="carrier_service_number_array" num="2"&gt;
    &lt;item value="*123"/&gt;
    &lt;item value="+ (111) 111-111"/&gt;
  &lt;/string-array&gt;
  </code>

Value: "carrier_service_number_array"

KEY_CARRIER_SETTINGS_ACTIVITY_COMPONENT_NAME_STRING

static val KEY_CARRIER_SETTINGS_ACTIVITY_COMPONENT_NAME_STRING: String

Flatten android.content.ComponentName of the carrier's settings activity.

Value: "carrier_settings_activity_component_name_string"

KEY_CARRIER_SETTINGS_ENABLE_BOOL

static val KEY_CARRIER_SETTINGS_ENABLE_BOOL: String

Display carrier settings menu if true

Value: "carrier_settings_enable_bool"

KEY_CARRIER_SUPPORTED_SATELLITE_SERVICES_PER_PROVIDER_BUNDLE

static val KEY_CARRIER_SUPPORTED_SATELLITE_SERVICES_PER_PROVIDER_BUNDLE: String

A PersistableBundle that contains a list of key-value pairs, where the values are integer arrays.

Keys are the PLMNs of satellite providers as strings and values are integer arrays of supported services with the following value:

• 1 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_VOICE
• 2 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_DATA
• 3 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_SMS
• 4 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_VIDEO
• 5 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_EMERGENCY
• 6 = android.telephony.NetworkRegistrationInfo#SERVICE_TYPE_MMS

An example config for two PLMNs "123411" and "123412":

<code>&lt;carrier_config&gt;
    &lt;pbundle_as_map name="carrier_supported_satellite_services_per_provider_bundle"&gt;
      &lt;int-array name = "123411" num = "2"&gt;
        &lt;item value = "3"/&gt;
        &lt;item value = "5"/&gt;
      &lt;/int-array&gt;
      &lt;int-array name = "123412" num = "1"&gt;
        &lt;item value = "3"/&gt;
      &lt;/int-array&gt;
    &lt;/pbundle_as_map&gt;
  &lt;/carrier_config&gt;
  </code>

This config is empty by default.

Value: "carrier_supported_satellite_services_per_provider_bundle"

KEY_CARRIER_SUPPORTS_OPP_DATA_AUTO_PROVISIONING_BOOL

static val KEY_CARRIER_SUPPORTS_OPP_DATA_AUTO_PROVISIONING_BOOL: String

Configuration to indicate that the carrier supports opportunistic data auto provisioning. Based on this flag, the device downloads and activates corresponding opportunistic profile.

Value: "carrier_supports_opp_data_auto_provisioning_bool"

KEY_CARRIER_SUPPORTS_SS_OVER_UT_BOOL

static val KEY_CARRIER_SUPPORTS_SS_OVER_UT_BOOL: String

Flag indicating whether or not the carrier supports Supplementary Services over the UT interface for this subscription. If true, the device will use Supplementary Services over UT when provisioned (see KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL). If false, this device will fallback to circuit switch for supplementary services and will disable this capability for IMS entirely. The default value for this key is false.

Value: "carrier_supports_ss_over_ut_bool"

KEY_CARRIER_SUPPORTS_TETHERING_BOOL

static val KEY_CARRIER_SUPPORTS_TETHERING_BOOL: String

Flag indicating if the carrier supports tethering of mobile data.

Value: "carrier_supports_tethering_bool"

KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL

static val KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL: String

Flag specifying whether IMS should be the first phone attempted for E911 even if the phone is not in service.

Value: "carrier_use_ims_first_for_emergency_bool"

KEY_CARRIER_USSD_METHOD_INT

static val KEY_CARRIER_USSD_METHOD_INT: String

Specify the method of selection for UE sending USSD requests. The default value is USSD_OVER_CS_PREFERRED.

Available options:

• 0: USSD_OVER_CS_PREFERRED
• 1: USSD_OVER_IMS_PREFERRED
• 2: USSD_OVER_CS_ONLY
• 3: USSD_OVER_IMS_ONLY

Value: "carrier_ussd_method_int"

KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL

static val KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL: String

Deprecated: Use Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE instead for determining if UT requires provisioning.

Flag indicating whether or not the IMS MmTel UT capability requires carrier provisioning before it can be set as enabled. If true, the UT capability will be set to false for the newly loaded subscription and will require the carrier provisioning app to set the persistent provisioning result. If false, the platform will not wait for provisioning status updates for the UT capability and enable the UT over IMS capability for the subscription when the subscription is loaded. The default value for this key is false.

Value: "carrier_ut_provisioning_required_bool"

KEY_CARRIER_VOLTE_AVAILABLE_BOOL

static val KEY_CARRIER_VOLTE_AVAILABLE_BOOL: String

Flag specifying whether VoLTE should be available for carrier, independent of carrier provisioning. If false: hard disabled. If true: then depends on carrier provisioning, availability, etc.

Value: "carrier_volte_available_bool"

KEY_CARRIER_VOLTE_OVERRIDE_WFC_PROVISIONING_BOOL

static val KEY_CARRIER_VOLTE_OVERRIDE_WFC_PROVISIONING_BOOL: String

Flag specifying if WFC provisioning depends on VoLTE provisioning. false: default value; honor actual WFC provisioning state. true: when VoLTE is not provisioned, treat WFC as not provisioned; when VoLTE is provisioned, honor actual WFC provisioning state. As of now, Verizon is the only carrier enforcing this dependency in their WFC awareness and activation requirements.

Value: "carrier_volte_override_wfc_provisioning_bool"

KEY_CARRIER_VOLTE_PROVISIONED_BOOL

static val KEY_CARRIER_VOLTE_PROVISIONED_BOOL: String

Deprecated: Use Ims#KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL instead.

This flag specifies whether VoLTE availability is based on provisioning. By default this is false. Used for UCE to determine if EAB provisioning checks should be based on provisioning.

Value: "carrier_volte_provisioned_bool"

KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL

static val KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL: String

Deprecated: Use Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE instead for finer-grained control. changing carrier_volte_provisioning_required_bool requires changes to mmtel_requires_provisioning_bundle and vice versa Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE

Flag specifying whether provisioning is required for VoLTE, Video Telephony, and WiFi Calling. Combines VoLTE, VT, VoWiFI calling provisioning into one parameter.

Value: "carrier_volte_provisioning_required_bool"

KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL

static val KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL: String

Flag specifying whether VoLTE TTY is supported.

Value: "carrier_volte_tty_supported_bool"

KEY_CARRIER_VT_AVAILABLE_BOOL

static val KEY_CARRIER_VT_AVAILABLE_BOOL: String

Flag specifying whether video telephony is available for carrier. If false: hard disabled. If true: then depends on carrier provisioning, availability, etc.

Value: "carrier_vt_available_bool"

KEY_CARRIER_VVM_PACKAGE_NAME_STRING

static val KEY_CARRIER_VVM_PACKAGE_NAME_STRING: String

Deprecated: use KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY.

The package name of the carrier's visual voicemail app to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

Value: "carrier_vvm_package_name_string"

KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY

static val KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY: String

A list of the carrier's visual voicemail app package names to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

Value: "carrier_vvm_package_name_string_array"

KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL

static val KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL: String

Flag specifying whether WFC over IMS should be available for carrier: independent of carrier provisioning. If false: hard disabled. If true: then depends on carrier provisioning, availability etc.

Value: "carrier_wfc_ims_available_bool"

KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL

static val KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL: String

Flag specifying whether WFC over IMS supports the "wifi only" option. If false, the wifi calling settings will not include an option for "wifi only". If true, the wifi calling settings will include an option for "wifi only"

By default, it is assumed that WFC supports "wifi only".

Value: "carrier_wfc_supports_wifi_only_bool"

KEY_CDMA_3WAYCALL_FLASH_DELAY_INT

static val KEY_CDMA_3WAYCALL_FLASH_DELAY_INT: String

For carriers which require an empty flash to be sent before sending the normal 3-way calling flash, the duration in milliseconds of the empty flash to send. When 0, no empty flash is sent.

Value: "cdma_3waycall_flash_delay_int"

KEY_CDMA_DTMF_TONE_DELAY_INT

static val KEY_CDMA_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between postdial DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "cdma_dtmf_tone_delay_int"

KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY

static val KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered non roaming. Value is string array of SIDs to be considered not roaming for 3GPP2 RATs.

Value: "cdma_nonroaming_networks_string_array"

KEY_CDMA_ROAMING_MODE_INT

static val KEY_CDMA_ROAMING_MODE_INT: String

The CDMA roaming mode (aka CDMA system select).

The value should be one of the CDMA_ROAMING_MODE_ constants in TelephonyManager. Values other than TelephonyManager#CDMA_ROAMING_MODE_RADIO_DEFAULT (which is the default) will take precedence over user selection.

Value: "cdma_roaming_mode_int"

KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY

static val KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered roaming. Value is string array of SIDs to be considered roaming for 3GPP2 RATs.

Value: "cdma_roaming_networks_string_array"

KEY_CELLULAR_SERVICE_CAPABILITIES_INT_ARRAY

static val KEY_CELLULAR_SERVICE_CAPABILITIES_INT_ARRAY: String

An array of cellular services supported by a subscription.

Permissible values include:

• SubscriptionManager#SERVICE_CAPABILITY_VOICE for voice services
• SubscriptionManager#SERVICE_CAPABILITY_SMS for SMS services
• SubscriptionManager#SERVICE_CAPABILITY_DATA for data services

Carrier-specific factors may influence how these services are supported. Therefore, modifying this carrier configuration might not always enable the specified services. These capability bitmasks should be considered as indicators of a carrier's preferred services to enhance user experience, rather than as absolute platform guarantees.

Device-level service capabilities, defined by TelephonyManager#isDeviceVoiceCapable and TelephonyManager#isDeviceSmsCapable, take precedence over these subscription-level settings. For instance, a device where TelephonyManager#isDeviceVoiceCapable returns false may not be able to make voice calls, even if subscribed to a service marked as voice-capable.

To determine a subscription's cellular service capabilities, use SubscriptionInfo#getServiceCapabilities(). To track changes in services, register a SubscriptionManager.OnSubscriptionsChangedListener and invoke the same method in its callback.

Emergency service availability may not depend on the cellular service capabilities. For example, emergency calls might be possible on a subscription even if it lacks SubscriptionManager#SERVICE_CAPABILITY_VOICE.

If unset, the default value is “[1, 2, 3]” (supports all cellular services).

Value: "cellular_service_capabilities_int_array"

KEY_CELLULAR_USAGE_SETTING_INT

static val KEY_CELLULAR_USAGE_SETTING_INT: String

Controls the cellular usage setting. The usage setting indicates whether a device will remain attached to a network based on the primary use case for the service. A device will detach and search for a more-preferred network if the primary use case (voice or data) is not satisfied. Depending on the type of device, it may operate in a voice or data-centric mode by default.

Sets the usage setting in accordance with 3gpp 24.301 sec 4.3 and 3gpp 24.501 sec 4.3. Also refer to "UE's usage setting" as defined in 3gpp 24.301 section 3.1 and 3gpp 23.221 Annex A. Either omit this key or pass a value of unknown to preserve the current setting.

Devices that support configuration of the cellular usage setting, including devices with HAL capability to set the cellular usage setting, must honor this setting accordingly. default, voice-centric, or data-centric. {@see SubscriptionInfo#getUsageSetting}

Value: "cellular_usage_setting_int"

KEY_CHECK_PRICING_WITH_CARRIER_FOR_DATA_ROAMING_BOOL

static val KEY_CHECK_PRICING_WITH_CARRIER_FOR_DATA_ROAMING_BOOL: String

Determines whether we should show a warning asking the user to check with their carrier on pricing when the user enabled data roaming, default to false.

Value: "check_pricing_with_carrier_data_roaming_bool"

KEY_CI_ACTION_ON_SYS_UPDATE_BOOL

static val KEY_CI_ACTION_ON_SYS_UPDATE_BOOL: String

Flag specifying whether an additional (client initiated) intent needs to be sent on System update

Value: "ci_action_on_sys_update_bool"

KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING

static val KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING: String

Extra to be included in the intent sent for additional action on System update

Value: "ci_action_on_sys_update_extra_string"

KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING

static val KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING: String

Value of extra included in intent sent for additional action on System update

Value: "ci_action_on_sys_update_extra_val_string"

KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING

static val KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING: String

Intent to be sent for the additional action on System update

Value: "ci_action_on_sys_update_intent_string"

KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING

static val KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING: String

The package name containing the ImsService that will be bound to the telephony framework to support IMS MMTEL feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_mmtel_package_override_string"

KEY_CONFIG_IMS_PACKAGE_OVERRIDE_STRING

static val KEY_CONFIG_IMS_PACKAGE_OVERRIDE_STRING: String

Deprecated: Use KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING and KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING instead to configure these values separately. If any of those values are not empty, they will override this value.

The package name containing the ImsService that will be bound to the telephony framework to support both IMS MMTEL and RCS feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_package_override_string"

KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING

static val KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING: String

The package name containing the ImsService that will be bound to the telephony framework to support IMS RCS feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_rcs_package_override_string"

KEY_CONFIG_PLANS_PACKAGE_OVERRIDE_STRING

static val KEY_CONFIG_PLANS_PACKAGE_OVERRIDE_STRING: String

Override the package that will manage SubscriptionPlan information instead of the CarrierService that defines this value.

Value: "config_plans_package_override_string"

KEY_CONFIG_TELEPHONY_USE_OWN_NUMBER_FOR_VOICEMAIL_BOOL

static val KEY_CONFIG_TELEPHONY_USE_OWN_NUMBER_FOR_VOICEMAIL_BOOL: String

Flag that specifies to use the user's own phone number as the voicemail number when there is no pre-loaded voicemail number on the SIM card.

KEY_DEFAULT_VM_NUMBER_STRING takes precedence over this flag.

If false, the system default (*86) will be used instead.

Value: "config_telephony_use_own_number_for_voicemail_bool"

KEY_CONFIG_WIFI_DISABLE_IN_ECBM

static val KEY_CONFIG_WIFI_DISABLE_IN_ECBM: String

Flag to indicate if Wi-Fi needs to be disabled in ECBM.

Value: "config_wifi_disable_in_ecbm"

KEY_CROSS_SIM_SPN_FORMAT_INT

static val KEY_CROSS_SIM_SPN_FORMAT_INT: String

Indexes of SPN format strings in crossSimSpnFormats.

Available options are:

• CROSS_SIM_SPN_FORMAT_CARRIER_NAME_ONLY: %s
• CROSS_SIM_SPN_FORMAT_CARRIER_NAME_WITH_BRANDING: %s Cross-SIM Calling

Value: "cross_sim_spn_format_int"

KEY_CSP_ENABLED_BOOL

static val KEY_CSP_ENABLED_BOOL: String

If this is true, the SIM card (through Customer Service Profile EF file) will be able to prevent manual operator selection. If false, this SIM setting will be ignored and manual operator selection will always be available. See CPHS4_2.WW6, CPHS B.4.7.1 for more information

Value: "csp_enabled_bool"

KEY_DATA_LIMIT_NOTIFICATION_BOOL

static val KEY_DATA_LIMIT_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user as they reach their cellular data limit. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_limit_notification_bool"

KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG

static val KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG: String

Controls the cellular data limit.

If the user uses more than this amount of data in their billing cycle, as defined by KEY_MONTHLY_DATA_CYCLE_DAY_INT, cellular data will be turned off by the user's phone. If the value is set to DATA_CYCLE_THRESHOLD_DISABLED, the data limit will be disabled.

This setting may be overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "data_limit_threshold_bytes_long"

KEY_DATA_RAPID_NOTIFICATION_BOOL

static val KEY_DATA_RAPID_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user when rapid cellular data usage is observed. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_rapid_notification_bool"

KEY_DATA_SWITCH_VALIDATION_MIN_INTERVAL_MILLIS_LONG

static val KEY_DATA_SWITCH_VALIDATION_MIN_INTERVAL_MILLIS_LONG: String

Data switch validation minimal interval, in milliseconds. If a connection to the default (Internet) PDN for the current subscription is validated on a given operator within a given tracking area, re-validations to that matching operator will be skipped if they would occur within the specified interval. Instead, the connection will automatically considered validated. If the network was validated within the interval but the latest validation result was false, the validation will not be skipped. If not set or set to 0, validation will not be skipped. The valid range of value is between 0 millisecond and 24 hours, inclusive in both sides. The default value is 24 hours.

Value: "data_switch_validation_min_gap_long"

KEY_DATA_SWITCH_VALIDATION_TIMEOUT_LONG

static val KEY_DATA_SWITCH_VALIDATION_TIMEOUT_LONG: String

Upon data switching between subscriptions within a carrier group, if switch depends on validation result, this value defines customized value of how long we wait for validation success before we fail and revoke the switch. Time out is in milliseconds.

Value: "data_switch_validation_timeout_long"

KEY_DATA_WARNING_NOTIFICATION_BOOL

static val KEY_DATA_WARNING_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user as they reach their cellular data warning. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_warning_notification_bool"

KEY_DATA_WARNING_THRESHOLD_BYTES_LONG

static val KEY_DATA_WARNING_THRESHOLD_BYTES_LONG: String

Controls the data usage warning.

If the user uses more than this amount of data in their billing cycle, as defined by KEY_MONTHLY_DATA_CYCLE_DAY_INT, the user will be alerted about the usage. If the value is set to DATA_CYCLE_THRESHOLD_DISABLED, the data usage warning will be disabled.

This setting may be overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "data_warning_threshold_bytes_long"

KEY_DEFAULT_SIM_CALL_MANAGER_STRING

static val KEY_DEFAULT_SIM_CALL_MANAGER_STRING: String

The default sim call manager to use when the default dialer doesn't implement one. A sim call manager can control and route outgoing and incoming phone calls, even if they're placed using another connection service (PSTN, for example).

Value: "default_sim_call_manager_string"

KEY_DEFAULT_VM_NUMBER_ROAMING_AND_IMS_UNREGISTERED_STRING

static val KEY_DEFAULT_VM_NUMBER_ROAMING_AND_IMS_UNREGISTERED_STRING: String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number while the device is both roaming and not registered for IMS. When empty string, no default voicemail number is specified for roaming network and unregistered state in IMS.

Value: "default_vm_number_roaming_and_ims_unregistered_string"

KEY_DEFAULT_VM_NUMBER_STRING

static val KEY_DEFAULT_VM_NUMBER_STRING: String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number. When empty string, no default voicemail number is specified.

Value: "default_vm_number_string"

KEY_DIAL_STRING_REPLACE_STRING_ARRAY

static val KEY_DIAL_STRING_REPLACE_STRING_ARRAY: String

Specifies a map from dialstrings to replacements for roaming network service numbers which cannot be replaced on the carrier side.

Individual entries have the format: [dialstring to replace]:[replacement]

Value: "dial_string_replace_string_array"

KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL

static val KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL: String

Disables dialing "*228" (OTASP provisioning) on CDMA carriers where it is not supported or is potentially harmful by locking the SIM to 3G.

Value: "disable_cdma_activation_code_bool"

KEY_DISABLE_CHARGE_INDICATION_BOOL

static val KEY_DISABLE_CHARGE_INDICATION_BOOL: String

The flag to disable the popup dialog which warns the user of data charges.

Value: "disable_charge_indication_bool"

KEY_DISABLE_SUPPLEMENTARY_SERVICES_IN_AIRPLANE_MODE_BOOL

static val KEY_DISABLE_SUPPLEMENTARY_SERVICES_IN_AIRPLANE_MODE_BOOL: String

Boolean indicating the Supplementary Services(SS) is disable when airplane mode on in the Call Settings menu. true: SS is disable when airplane mode on. false: SS is enable when airplane mode on. The default value for this key is false

Value: "disable_supplementary_services_in_airplane_mode_bool"

KEY_DISCONNECT_CAUSE_PLAY_BUSYTONE_INT_ARRAY

static val KEY_DISCONNECT_CAUSE_PLAY_BUSYTONE_INT_ARRAY: String

DisconnectCause array to play busy tone. Value should be array of android.telephony.DisconnectCause.

Value: "disconnect_cause_play_busytone_int_array"

KEY_DISPLAY_CALL_STRENGTH_INDICATOR_BOOL

static val KEY_DISPLAY_CALL_STRENGTH_INDICATOR_BOOL: String

Determine whether or not to display a call strength indicator for this carrier in the System UI. Disabling the indication may be reasonable if the carrier's calling is not integrated into the Android telephony stack (e.g. it is OTT). true: Use telephony APIs to detect the current networking medium of calling and display a UI indication based on the current strength (e.g. signal level) of that medium. false: Do not display the call strength indicator.

Value: "display_call_strength_indicator_bool"

KEY_DISPLAY_HD_AUDIO_PROPERTY_BOOL

static val KEY_DISPLAY_HD_AUDIO_PROPERTY_BOOL: String

Determines whether High Definition audio property is displayed in the dialer UI. If false, remove the HD audio property from the connection so that HD audio related UI is not displayed. If true, keep HD audio property as it is configured.

Value: "display_hd_audio_property_bool"

KEY_DROP_VIDEO_CALL_WHEN_ANSWERING_AUDIO_CALL_BOOL

static val KEY_DROP_VIDEO_CALL_WHEN_ANSWERING_AUDIO_CALL_BOOL: String

When true, if the user is in an ongoing video call over WIFI and answers an incoming audio call, the video call will be disconnected before the audio call is answered. This is in contrast to the usual expected behavior where a foreground video call would be put into the background and held when an incoming audio call is answered.

Value: "drop_video_call_when_answering_audio_call_bool"

KEY_DTMF_TYPE_ENABLED_BOOL

static val KEY_DTMF_TYPE_ENABLED_BOOL: String

Flag indicating if dtmf tone type is enabled

Value: "dtmf_type_enabled_bool"

KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT

static val KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT: String

The duration in seconds that platform call and message blocking is disabled after the user contacts emergency services. Platform considers values for below cases: 1) 0 <= VALUE <= 604800(one week): the value will be used as the duration directly. 2) VALUE > 604800(one week): will use the default value as duration instead. 3) VALUE < 0: block will be disabled forever until user re-enable block manually, the suggested value to disable forever is -1. See android.provider.BlockedNumberContract#notifyEmergencyContact(Context) See android.provider.BlockedNumberContract#isBlocked(Context, String).

Value: "duration_blocking_disabled_after_emergency_int"

KEY_EDITABLE_ENHANCED_4G_LTE_BOOL

static val KEY_EDITABLE_ENHANCED_4G_LTE_BOOL: String

Determine whether user can toggle Enhanced 4G LTE Mode in Settings.

Value: "editable_enhanced_4g_lte_bool"

KEY_EDITABLE_VOICEMAIL_NUMBER_BOOL

static val KEY_EDITABLE_VOICEMAIL_NUMBER_BOOL: String

Since the default voicemail number is empty, if a SIM card does not have a voicemail number available the user cannot use voicemail. This flag allows the user to edit the voicemail number in such cases, and is false by default.

Value: "editable_voicemail_number_bool"

KEY_EDITABLE_VOICEMAIL_NUMBER_SETTING_BOOL

static val KEY_EDITABLE_VOICEMAIL_NUMBER_SETTING_BOOL: String

Determine whether user can edit voicemail number in Settings.

Value: "editable_voicemail_number_setting_bool"

KEY_EDITABLE_WFC_MODE_BOOL

static val KEY_EDITABLE_WFC_MODE_BOOL: String

Determine whether user can switch Wi-Fi preferred or Cellular preferred in calling preference. Some operators support Wi-Fi Calling only, not VoLTE. They don't need "Cellular preferred" option. In this case, set uneditable attribute for preferred preference.

Value: "editable_wfc_mode_bool"

KEY_EDITABLE_WFC_ROAMING_MODE_BOOL

static val KEY_EDITABLE_WFC_ROAMING_MODE_BOOL: String

Determine whether user can change Wi-Fi Calling preference in roaming. false - roaming preference cannot be changed by user independently. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is false, KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT is used as the default value. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is true, roaming preference is the same as home preference and KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT is used as the default value. true - roaming preference can be changed by user independently if KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is false. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is true, this configuration is ignored and roaming preference cannot be changed.

Value: "editable_wfc_roaming_mode_bool"

KEY_EMERGENCY_NOTIFICATION_DELAY_INT

static val KEY_EMERGENCY_NOTIFICATION_DELAY_INT: String

Time delay (in ms) after which we show the notification for emergency calls, while the device is registered over WFC. Default value is -1, which indicates that this notification is not pertinent for a particular carrier. We've added a delay to prevent false positives.

Value: "emergency_notification_delay_int"

KEY_EMERGENCY_NUMBER_PREFIX_STRING_ARRAY

static val KEY_EMERGENCY_NUMBER_PREFIX_STRING_ARRAY: String

Indicates zero or more emergency number prefix(es), because some carrier requires if users dial an emergency number address with a specific prefix, the combination of the prefix and the address is also a valid emergency number to dial. For example, an emergency number prefix is 318, and the emergency number is 911. Both 318911 and 911 can be dialed by users for emergency call. An empty array of string indicates that current carrier does not have this requirement.

Value: "emergency_number_prefix_string_array"

KEY_ENABLE_CROSS_SIM_CALLING_ON_OPPORTUNISTIC_DATA_BOOL

static val KEY_ENABLE_CROSS_SIM_CALLING_ON_OPPORTUNISTIC_DATA_BOOL: String

Flag specifying whether cross sim calling on opportunistic data is supported for carrier. When false the carrier does not support cross sim calling on opportunistic data. When true the carrier does support cross sim calling on opportunistic data.

Value: "enable_cross_sim_calling_on_opportunistic_data_bool"

KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL

static val KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL: String

If true, enable vibration (haptic feedback) for key presses in the EmergencyDialer activity. The pattern is set on a per-platform basis using config_virtualKeyVibePattern. To be consistent with the regular Dialer, this value should agree with the corresponding values from config.xml under apps/Contacts.

Value: "enable_dialer_key_vibration_bool"

KEY_ENHANCED_4G_LTE_ON_BY_DEFAULT_BOOL

static val KEY_ENHANCED_4G_LTE_ON_BY_DEFAULT_BOOL: String

Sets the default state for the "Enhanced 4G LTE" or "Advanced Calling" mode toggle set by the user. When this is true, this mode by default is on, otherwise if false, this mode by default is off.

Value: "enhanced_4g_lte_on_by_default_bool"

KEY_ENHANCED_4G_LTE_TITLE_VARIANT_INT

static val KEY_ENHANCED_4G_LTE_TITLE_VARIANT_INT: String

The index indicates the carrier specified title string of Enhanced 4G LTE Mode settings. Default value is 0, which indicates the default title string.

Value: "enhanced_4g_lte_title_variant_int"

KEY_ESIM_DOWNLOAD_RETRY_BACKOFF_TIMER_SEC_INT

static val KEY_ESIM_DOWNLOAD_RETRY_BACKOFF_TIMER_SEC_INT: String

This timer value is used in the eSIM Exponential Backoff download retry algorithm. Value should be in seconds.

1. When the first download failure occurs, retry download after BACKOFF_TIMER_VALUE seconds.
2. If download fails again then, retry after either BACKOFF_TIMER_VALUE, 2xBACKOFF_TIMER_VALUE, or 3xBACKOFF_TIMER_VALUE seconds.
3. In general after the cth failed attempt, retry after k * BACKOFF_TIMER_VALUE seconds, where k is a random integer between 1 and 2^c − 1. Max c value is KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT

Value: "esim_download_retry_backoff_timer_sec_int"

KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT

static val KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT: String

If eSIM profile download fails then, the number of retry attempts by UE will be based on this configuration. If download still fails even after the MAX attempts configured by this item then the retry is postponed until next device bootup.

Value: "esim_max_download_retry_attempts_int"

KEY_FORCE_HOME_NETWORK_BOOL

static val KEY_FORCE_HOME_NETWORK_BOOL: String

Override the platform's notion of a network operator being considered non roaming. If true all networks are considered as home network a.k.a. non-roaming. When false, the 2 pairs of CMDA and GSM roaming/non-roaming arrays are consulted.

Value: "force_home_network_bool"

KEY_GSM_DTMF_TONE_DELAY_INT

static val KEY_GSM_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between postdial DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "gsm_dtmf_tone_delay_int"

KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY

static val KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered not roaming. Value is string array of MCCMNCs to be considered not roaming for 3GPP RATs.

Value: "gsm_nonroaming_networks_string_array"

KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY

static val KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered roaming. Value is string array of MCCMNCs to be considered roaming for 3GPP RATs.

Value: "gsm_roaming_networks_string_array"

KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL

static val KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL: String

Determines if device implements a noise suppression device for in call audio.

Value: "has_in_call_noise_suppression_bool"

KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL

static val KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL: String

Control whether users can reach the carrier portions of Cellular Network Settings.

Value: "hide_carrier_network_settings_bool"

KEY_HIDE_ENHANCED_4G_LTE_BOOL

static val KEY_HIDE_ENHANCED_4G_LTE_BOOL: String

Determines whether the Enhanced 4G LTE toggle will be shown in the settings. When this option is true, the toggle will be hidden regardless of whether the device and carrier supports 4G LTE or not.

Value: "hide_enhanced_4g_lte_bool"

KEY_HIDE_IMS_APN_BOOL

static val KEY_HIDE_IMS_APN_BOOL: String

Determine whether IMS apn can be shown.

Value: "hide_ims_apn_bool"

KEY_HIDE_LTE_PLUS_DATA_ICON_BOOL

static val KEY_HIDE_LTE_PLUS_DATA_ICON_BOOL: String

Boolean indicating if LTE+ icon should be shown if available.

Value: "hide_lte_plus_data_icon_bool"

KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL

static val KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL: String

Determine whether preferred network type can be shown.

Value: "hide_preferred_network_type_bool"

KEY_HIDE_PRESET_APN_DETAILS_BOOL

static val KEY_HIDE_PRESET_APN_DETAILS_BOOL: String

Flag to hide Preset APN details. If true, user cannot enter ApnEditor view of Preset APN, and cannot view details of the APN. If false, user can enter ApnEditor view of Preset APN. Default value is false.

Value: "hide_preset_apn_details_bool"

KEY_HIDE_SIM_LOCK_SETTINGS_BOOL

static val KEY_HIDE_SIM_LOCK_SETTINGS_BOOL: String

Control whether users can reach the SIM lock settings.

Value: "hide_sim_lock_settings_bool"

KEY_HIDE_TTY_HCO_VCO_WITH_RTT_BOOL

static val KEY_HIDE_TTY_HCO_VCO_WITH_RTT_BOOL: String

Indicates if the TTY HCO and VCO options should be hidden in the accessibility menu if the device is capable of RTT.

Value: "hide_tty_hco_vco_with_rtt"

KEY_IGNORE_DATA_ENABLED_CHANGED_FOR_VIDEO_CALLS

static val KEY_IGNORE_DATA_ENABLED_CHANGED_FOR_VIDEO_CALLS: String

When true, changes to the mobile data enabled switch will not cause the VT registration state to change. That is, turning on or off mobile data will not cause VT to be enabled or disabled. When false, disabling mobile data will cause VT to be de-registered.

Value: "ignore_data_enabled_changed_for_video_calls"

KEY_IGNORE_RTT_MODE_SETTING_BOOL

static val KEY_IGNORE_RTT_MODE_SETTING_BOOL: String

When true, the phone will always tell the IMS stack to keep RTT enabled and determine on a per-call basis (based on extras from the dialer app) whether a call should be an RTT call or not. When false, the old behavior is used, where the toggle in accessibility settings is used to set the IMS stack's RTT enabled state.

Value: "ignore_rtt_mode_setting_bool"

KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL

static val KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL: String

Flag indicating whether the Phone app should ignore EVENT_SIM_NETWORK_LOCKED events from the Sim. If true, this will prevent the IccNetworkDepersonalizationPanel from being shown, and effectively disable the "Sim network lock" feature.

Value: "ignore_sim_network_locked_events_bool"

KEY_IMS_CONFERENCE_SIZE_LIMIT_INT

static val KEY_IMS_CONFERENCE_SIZE_LIMIT_INT: String

Determines the maximum number of participants the carrier supports for a conference call. This number is exclusive of the current device. A conference between 3 devices, for example, would have a size limit of 2 participants. Enforced when KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL is true.

Value: "ims_conference_size_limit_int"

KEY_IMS_DTMF_TONE_DELAY_INT

static val KEY_IMS_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "ims_dtmf_tone_delay_int"

KEY_INCLUDE_LTE_FOR_NR_ADVANCED_THRESHOLD_BANDWIDTH_BOOL

static val KEY_INCLUDE_LTE_FOR_NR_ADVANCED_THRESHOLD_BANDWIDTH_BOOL: String

Indicating whether to include LTE cell bandwidths when determining whether the aggregated cell bandwidth meets the required threshold for NR advanced.

Value: "include_lte_for_nr_advanced_threshold_bandwidth_bool"

KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL

static val KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL: String

Determines whether a maximum size limit for IMS conference calls is enforced on the device. When true, IMS conference calls will be limited to at most KEY_IMS_CONFERENCE_SIZE_LIMIT_INT participants. When false, no attempt is made to limit the number of participants in a conference (the carrier will raise an error when an attempt is made to merge too many participants into a conference).

Note: The maximum size of a conference can ONLY be supported where KEY_SUPPORT_IMS_CONFERENCE_EVENT_PACKAGE_BOOL is true since the platform needs conference event package data to accurately know the number of participants in the conference.

Value: "is_ims_conference_size_enforced_bool"

KEY_IS_OPPORTUNISTIC_SUBSCRIPTION_BOOL

static val KEY_IS_OPPORTUNISTIC_SUBSCRIPTION_BOOL: String

A boolean property indicating whether this subscription should be managed as an opportunistic subscription. If true, then this subscription will be selected based on available coverage and will not be available for a user in settings menus for selecting macro network providers. If unset, defaults to “false”.

This key will work all the way back to android.os.Build.VERSION_CODES#Q.

Value: "is_opportunistic_subscription_bool"

KEY_LTE_ENABLED_BOOL

static val KEY_LTE_ENABLED_BOOL: String

Boolean to decide whether LTE is enabled.

Value: "lte_enabled_bool"

KEY_LTE_RSRQ_THRESHOLDS_INT_ARRAY

static val KEY_LTE_RSRQ_THRESHOLDS_INT_ARRAY: String

A list of 4 customized LTE Reference Signal Received Quality (RSRQ) thresholds. Reference: TS 136.133 v12.6.0 section 9.1.7 - RSRQ Measurement Report Mapping. 4 threshold integers must be within the boundaries [-34 dB, 3 dB], and the levels are: "NONE: [-34, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 3]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "lte_rsrq_thresholds_int_array"

KEY_LTE_RSSNR_THRESHOLDS_INT_ARRAY

static val KEY_LTE_RSSNR_THRESHOLDS_INT_ARRAY: String

A list of 4 customized LTE Reference Signal Signal to Noise Ratio (RSSNR) thresholds. 4 threshold integers must be within the boundaries [-20 dB, 30 dB], and the levels are: "NONE: [-20, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 30]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "lte_rssnr_thresholds_int_array"

KEY_MDN_IS_ADDITIONAL_VOICEMAIL_NUMBER_BOOL

static val KEY_MDN_IS_ADDITIONAL_VOICEMAIL_NUMBER_BOOL: String

When checking if a given number is the voicemail number, if this flag is true then in addition to comparing the given number to the voicemail number, we also compare it to the mdn. If this flag is false, the given number is only compared to the voicemail number. By default this value is false.

Value: "mdn_is_additional_voicemail_number_bool"

KEY_MMS_ALIAS_ENABLED_BOOL

static val KEY_MMS_ALIAS_ENABLED_BOOL: String

Value: "aliasEnabled"

KEY_MMS_ALIAS_MAX_CHARS_INT

static val KEY_MMS_ALIAS_MAX_CHARS_INT: String

Value: "aliasMaxChars"

KEY_MMS_ALIAS_MIN_CHARS_INT

static val KEY_MMS_ALIAS_MIN_CHARS_INT: String

Value: "aliasMinChars"

KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL

static val KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL: String

Value: "allowAttachAudio"

KEY_MMS_APPEND_TRANSACTION_ID_BOOL

static val KEY_MMS_APPEND_TRANSACTION_ID_BOOL: String

Value: "enabledTransID"

KEY_MMS_CLOSE_CONNECTION_BOOL

static val KEY_MMS_CLOSE_CONNECTION_BOOL: String

If true, add "Connection: close" header to MMS HTTP requests so the connection is immediately closed (disabling keep-alive).

Value: "mmsCloseConnection"

KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING

static val KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING: String

Value: "emailGatewayNumber"

KEY_MMS_GROUP_MMS_ENABLED_BOOL

static val KEY_MMS_GROUP_MMS_ENABLED_BOOL: String

Value: "enableGroupMms"

KEY_MMS_HTTP_PARAMS_STRING

static val KEY_MMS_HTTP_PARAMS_STRING: String

Value: "httpParams"

KEY_MMS_HTTP_SOCKET_TIMEOUT_INT

static val KEY_MMS_HTTP_SOCKET_TIMEOUT_INT: String

Value: "httpSocketTimeout"

KEY_MMS_MAX_IMAGE_HEIGHT_INT

static val KEY_MMS_MAX_IMAGE_HEIGHT_INT: String

Value: "maxImageHeight"

KEY_MMS_MAX_IMAGE_WIDTH_INT

static val KEY_MMS_MAX_IMAGE_WIDTH_INT: String

Value: "maxImageWidth"

KEY_MMS_MAX_MESSAGE_SIZE_INT

static val KEY_MMS_MAX_MESSAGE_SIZE_INT: String

Value: "maxMessageSize"

KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT

static val KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT: String

Value: "maxMessageTextSize"

KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL

static val KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL: String

Value: "enableMMSDeliveryReports"

KEY_MMS_MMS_ENABLED_BOOL

static val KEY_MMS_MMS_ENABLED_BOOL: String

Value: "enabledMMS"

KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL

static val KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL: String

Value: "enableMMSReadReports"

KEY_MMS_MULTIPART_SMS_ENABLED_BOOL

static val KEY_MMS_MULTIPART_SMS_ENABLED_BOOL: String

Value: "enableMultipartSMS"

KEY_MMS_NAI_SUFFIX_STRING

static val KEY_MMS_NAI_SUFFIX_STRING: String

Value: "naiSuffix"

KEY_MMS_NETWORK_RELEASE_TIMEOUT_MILLIS_INT

static val KEY_MMS_NETWORK_RELEASE_TIMEOUT_MILLIS_INT: String

Waiting time in milliseconds used before releasing an MMS data call. Not tearing down an MMS data connection immediately helps to reduce the message delivering latency if messaging continues between all parties in the conversation since the same data connection can be reused for further messages. This timer will control how long the data call will be kept alive before being torn down.

Value: "mms_network_release_timeout_millis_int"

KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL

static val KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL: String

Value: "enabledNotifyWapMMSC"

KEY_MMS_RECIPIENT_LIMIT_INT

static val KEY_MMS_RECIPIENT_LIMIT_INT: String

Value: "recipientLimit"

KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL

static val KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL: String

Value: "sendMultipartSmsAsSeparateMessages"

KEY_MMS_SHOW_CELL_BROADCAST_APP_LINKS_BOOL

static val KEY_MMS_SHOW_CELL_BROADCAST_APP_LINKS_BOOL: String

Value: "config_cellBroadcastAppLinks"

KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL

static val KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL: String

Value: "enableSMSDeliveryReports"

KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT

static val KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT: String

Value: "smsToMmsTextLengthThreshold"

KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT

static val KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT: String

Value: "smsToMmsTextThreshold"

KEY_MMS_SUBJECT_MAX_LENGTH_INT

static val KEY_MMS_SUBJECT_MAX_LENGTH_INT: String

Value: "maxSubjectLength"

KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL

static val KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL: String

Value: "supportHttpCharsetHeader"

KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL

static val KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL: String

Value: "supportMmsContentDisposition"

KEY_MMS_UA_PROF_TAG_NAME_STRING

static val KEY_MMS_UA_PROF_TAG_NAME_STRING: String

Value: "uaProfTagName"

KEY_MMS_UA_PROF_URL_STRING

static val KEY_MMS_UA_PROF_URL_STRING: String

Value: "uaProfUrl"

KEY_MMS_USER_AGENT_STRING

static val KEY_MMS_USER_AGENT_STRING: String

Value: "userAgent"

KEY_MONTHLY_DATA_CYCLE_DAY_INT

static val KEY_MONTHLY_DATA_CYCLE_DAY_INT: String

The day of the month (1-31) on which the data cycle rolls over.

If the current month does not have this day, the cycle will roll over at the start of the next month.

This setting may be still overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "monthly_data_cycle_day_int"

KEY_NTN_LTE_RSRP_THRESHOLDS_INT_ARRAY

static val KEY_NTN_LTE_RSRP_THRESHOLDS_INT_ARRAY: String

This threshold is used when connected to a non-terrestrial LTE network. A list of 4 NTN LTE RSRP thresholds above which a signal level is considered POOR, MODERATE, GOOD, or EXCELLENT, to be used in SignalStrength reporting. Note that the min and max thresholds are fixed at -140 and -44, as explained in TS 136.133 9.1.4 - RSRP Measurement Report Mapping.

See SignalStrength#MAX_LTE_RSRP and SignalStrength#MIN_LTE_RSRP. Any signal level outside these boundaries is considered invalid.

Value: "ntn_lte_rsrp_thresholds_int_array"

KEY_NTN_LTE_RSRQ_THRESHOLDS_INT_ARRAY

static val KEY_NTN_LTE_RSRQ_THRESHOLDS_INT_ARRAY: String

This threshold is used when connected to a non-terrestrial LTE network. A list of 4 customized NTN LTE Reference Signal Received Quality (RSRQ) thresholds. Reference: TS 136.133 v12.6.0 section 9.1.7 - RSRQ Measurement Report Mapping. 4 threshold integers must be within the boundaries [-34 dB, 3 dB], and the levels are: "NONE: [-34, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 3]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "ntn_lte_rsrq_thresholds_int_array"

KEY_NTN_LTE_RSSNR_THRESHOLDS_INT_ARRAY

static val KEY_NTN_LTE_RSSNR_THRESHOLDS_INT_ARRAY: String

This threshold is used when connected to a non-terrestrial LTE network. A list of 4 customized NTN LTE Reference Signal Signal to Noise Ratio (RSSNR) thresholds. 4 threshold integers must be within the boundaries [-20 dB, 30 dB], and the levels are: "NONE: [-20, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 30]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "ntn_lte_rssnr_thresholds_int_array"

KEY_ONLY_AUTO_SELECT_IN_HOME_NETWORK_BOOL

static val KEY_ONLY_AUTO_SELECT_IN_HOME_NETWORK_BOOL: String

Only allow auto selection in Advanced Network Settings when in home network. Manual selection is allowed when in roaming network.

Value: "only_auto_select_in_home_network"

KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY

static val KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY: String

List of network type constants which support only a single data connection at a time. Some carriers do not support multiple PDP on UMTS.

Value: "only_single_dc_allowed_int_array"

KEY_OPERATOR_SELECTION_EXPAND_BOOL

static val KEY_OPERATOR_SELECTION_EXPAND_BOOL: String

Control whether users can choose a network operator.

Value: "operator_selection_expand_bool"

KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG: String

Controls back off time in milli seconds for switching back to opportunistic subscription. This time will be added to CarrierConfigManager#KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG to determine hysteresis time if there is ping pong situation (determined by system app or 1st party app) between primary and opportunistic subscription. Ping ping situation is defined in #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG. If ping pong situation continuous #KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG will be added to previously determined hysteresis time.

Value: "opportunistic_network_backoff_time_long"

KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_EXIT_HYSTERESIS_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_EXIT_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data from opportunistic network to primary network.

Value: "opportunistic_network_data_switch_exit_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data to an opportunistic network.

Value: "opportunistic_network_data_switch_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_OR_EXIT_HYSTERESIS_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_OR_EXIT_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before attaching to a network.

Value: "opportunistic_network_entry_or_exit_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_BANDWIDTH_INT

static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_BANDWIDTH_INT: String

Controls bandwidth threshold in Kbps at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

Value: "opportunistic_network_entry_threshold_bandwidth_int"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSRP_INT

static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSRP_INT: String

Controls RSRP threshold, in dBm, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

The value of CellSignalStrengthLte#getRsrp() will be compared with this threshold.

Value: "opportunistic_network_entry_threshold_rsrp_int"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSSNR_INT

static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSSNR_INT: String

Controls RSSNR threshold, in dB, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

The value of CellSignalStrengthLte#getRssnr() will be compared with this threshold.

Value: "opportunistic_network_entry_threshold_rssnr_int"

KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT

static val KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT: String

Controls RSRP threshold, in dBm, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

The value of CellSignalStrengthLte#getRsrp() will be compared with this threshold.

Value: "opportunistic_network_exit_threshold_rsrp_int"

KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT

static val KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT: String

Controls RSSNR threshold, in dB, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

The value of CellSignalStrengthLte#getRssnr() will be compared with this threshold.

Value: "opportunistic_network_exit_threshold_rssnr_int"

KEY_OPPORTUNISTIC_NETWORK_MAX_BACKOFF_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_MAX_BACKOFF_TIME_LONG: String

Controls the max back off time in milli seconds for switching back to opportunistic subscription. This time will be the max hysteresis that can be determined irrespective of there is continuous ping pong situation or not as described in #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG and #KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG.

Value: "opportunistic_network_max_backoff_time_long"

KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG

static val KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG: String

Controls the ping pong determination of opportunistic network. If opportunistic network is determined as out of service or below #KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT or #KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT within #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG of switching to opportunistic network, it will be determined as ping pong situation by system app or 1st party app.

Value: "opportunistic_network_ping_pong_time_long"

KEY_PARAMETERS_USED_FOR_NTN_LTE_SIGNAL_BAR_INT

static val KEY_PARAMETERS_USED_FOR_NTN_LTE_SIGNAL_BAR_INT: String

This threshold is used when connected to a non-terrestrial LTE network. Bit-field integer to determine whether to use Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), or/and Reference Signal Signal to Noise Ratio (RSSNR) for the number of NTN LTE signal bars and signal criteria reporting enabling.

If a measure is not set, signal criteria reporting from modem will not be triggered and not be used for calculating signal level. If multiple measures are set bit, the parameter whose value is smallest is used to indicate the signal level.

• RSRP = 1 << 0
• RSRQ = 1 << 1
• RSSNR = 1 << 2

The value of this key must be bitwise OR of CellSignalStrengthLte#USE_RSRP, CellSignalStrengthLte#USE_RSRQ, CellSignalStrengthLte#USE_RSSNR.

For example, if both RSRP and RSRQ are used, the value of key is 3 (1 << 0 | 1 << 1). If the key is invalid or not configured, a default value (RSRP = 1 << 0) will apply.

Value: "parameters_used_for_ntn_lte_signal_bar_int"

KEY_PING_TEST_BEFORE_DATA_SWITCH_BOOL

static val KEY_PING_TEST_BEFORE_DATA_SWITCH_BOOL: String

Controls whether to do ping test before switching data to opportunistic network. This carrier config is used to disable this feature.

Value: "ping_test_before_data_switch_bool"

KEY_PREFER_2G_BOOL

static val KEY_PREFER_2G_BOOL: String

Used in the Preferred Network Types menu to determine if the 2G option is displayed. Value defaults to false as of Android T to discourage the use of insecure 2G protocols.

Value: "prefer_2g_bool"

KEY_PREFER_3G_VISIBILITY_BOOL

static val KEY_PREFER_3G_VISIBILITY_BOOL: String

Used in the Preferred Network Types menu to determine if the 3G option is displayed.

Value: "prefer_3g_visibility_bool"

KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT

static val KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT: String

The maximum number of times in a day that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The default value is 2 times.

Value: "premium_capability_maximum_daily_notification_count_int"

KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT

static val KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT: String

The maximum number of times in a month that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The default value is 10 times.

Value: "premium_capability_maximum_monthly_notification_count_int"

KEY_PREMIUM_CAPABILITY_NETWORK_SETUP_TIME_MILLIS_LONG

static val KEY_PREMIUM_CAPABILITY_NETWORK_SETUP_TIME_MILLIS_LONG: String

The amount of time in milliseconds within which the network must set up a slicing configuration for the premium capability after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_SUCCESS. During the setup time, calls to TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) will return TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_PENDING_NETWORK_SETUP. If the network fails to set up a slicing configuration for the premium capability within the setup time, subsequent purchase requests will be allowed to go through again. The default value is 5 minutes.

Value: "premium_capability_network_setup_time_millis_long"

KEY_PREMIUM_CAPABILITY_NOTIFICATION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG

static val KEY_PREMIUM_CAPABILITY_NOTIFICATION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG: String

The amount of time in milliseconds that the notification for a performance boost via premium capabilities should be blocked when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The maximum number of performance boost notifications to show the user are defined in KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT and KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT. The default value is 30 minutes.

Value: "premium_capability_notification_backoff_hysteresis_time_millis_long"

KEY_PREMIUM_CAPABILITY_NOTIFICATION_DISPLAY_TIMEOUT_MILLIS_LONG

static val KEY_PREMIUM_CAPABILITY_NOTIFICATION_DISPLAY_TIMEOUT_MILLIS_LONG: String

The amount of time in milliseconds the notification for a performance boost via premium capabilities will be visible to the user after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) requests user action to purchase the boost from the carrier. Once the timeout expires, the performance boost notification will be automatically dismissed and the request will fail with TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_TIMEOUT. The default value is 30 minutes.

Value: "premium_capability_notification_display_timeout_millis_long"

KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG

static val KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG: String

The amount of time in milliseconds that the purchase request should be throttled when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to the carrier. The default value is 30 minutes.

Value: "premium_capability_purchase_condition_backoff_hysteresis_time_millis_long"

KEY_PREMIUM_CAPABILITY_PURCHASE_URL_STRING

static val KEY_PREMIUM_CAPABILITY_PURCHASE_URL_STRING: String

The URL to redirect to when the user clicks on the notification for a performance boost via premium capabilities after applications call TelephonyManager#purchasePremiumCapability(int, Executor, Consumer). If the URL is empty or invalid, the purchase request will return TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_FEATURE_NOT_SUPPORTED. This is empty by default.

Value: "premium_capability_purchase_url_string"

KEY_PREMIUM_CAPABILITY_SUPPORTED_ON_LTE_BOOL

static val KEY_PREMIUM_CAPABILITY_SUPPORTED_ON_LTE_BOOL: String

Whether to allow premium capabilities to be purchased when the device is connected to LTE. If this is true, applications can call TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) when connected to TelephonyManager#NETWORK_TYPE_LTE to purchase and use premium capabilities. If this is false, applications can only purchase and use premium capabilities when connected to TelephonyManager#NETWORK_TYPE_NR. This is false by default.

Value: "premium_capability_supported_on_lte_bool"

KEY_PREVENT_CLIR_ACTIVATION_AND_DEACTIVATION_CODE_BOOL

static val KEY_PREVENT_CLIR_ACTIVATION_AND_DEACTIVATION_CODE_BOOL: String

Flag specifying whether to prevent sending CLIR activation("*31#") and deactivation("#31#") code only without dialing number. When true, these are prevented, false otherwise.

Value: "prevent_clir_activation_and_deactivation_code_bool"

KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY

static val KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY: String

A list of failure cause codes that will trigger a modem restart when telephony receiving one of those during data setup. The cause codes are defined in 3GPP TS 24.008 Annex I and TS 24.301 Annex B.

Value: "radio_restart_failure_causes_int_array"

KEY_RATCHET_NR_ADVANCED_BANDWIDTH_IF_RRC_IDLE_BOOL

static val KEY_RATCHET_NR_ADVANCED_BANDWIDTH_IF_RRC_IDLE_BOOL: String

Indicating whether to ratchet the aggregated cell bandwidths on receiving new values when the device is in RRC IDLE mode. The aggregated cell bandwidths are used for determining NR advanced state. If this is true, we will only update the aggregate cell bandwidths if the new aggregate is higher than the current aggregate and the anchor NR cell is the same. If this is false, we will always update the aggregate cell bandwidths when receiving new values.

Value: "ratchet_nr_advanced_bandwidth_if_rrc_idle_bool"

KEY_RCS_CONFIG_SERVER_URL_STRING

static val KEY_RCS_CONFIG_SERVER_URL_STRING: String

The RCS configuration server URL. This URL is used to initiate RCS provisioning.

Value: "rcs_config_server_url_string"

KEY_READ_ONLY_APN_FIELDS_STRING_ARRAY

static val KEY_READ_ONLY_APN_FIELDS_STRING_ARRAY: String

APN fields that user is not allowed to modify.

Value: "read_only_apn_fields_string_array"

KEY_READ_ONLY_APN_TYPES_STRING_ARRAY

static val KEY_READ_ONLY_APN_TYPES_STRING_ARRAY: String

APN types that user is not allowed to modify.

Value: "read_only_apn_types_string_array"

KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL

static val KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL: String

Flag to require or skip entitlement checks. If true, entitlement checks will be executed if device has been configured for it, If false, entitlement checks will be skipped.

Value: "require_entitlement_checks_bool"

KEY_RESTART_RADIO_ON_PDP_FAIL_REGULAR_DEACTIVATION_BOOL

static val KEY_RESTART_RADIO_ON_PDP_FAIL_REGULAR_DEACTIVATION_BOOL: String

Deprecated: Use KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY instead

Flag indicating whether radio is to be restarted on error PDP_FAIL_REGULAR_DEACTIVATION This is false by default.

Value: "restart_radio_on_pdp_fail_regular_deactivation_bool"