Added in API level 33

Builder


class Builder
kotlin.Any
   ↳ android.net.wifi.rtt.ResponderConfig.Builder

Builder class used to construct ResponderConfig objects.

Summary

Public constructors

Public methods
ResponderConfig

Build ResponderConfig given the current configurations made on the builder.

ResponderConfig.Builder
set80211azNtbSupported(supports80211azNtb: Boolean)

Sets an indication the access point can to respond to the IEEE 802.

ResponderConfig.Builder
set80211mcSupported(supports80211mc: Boolean)

Sets an indication the access point can to respond to the two-sided Wi-Fi RTT protocol, but, if false, indicates only one-sided Wi-Fi RTT is possible.

ResponderConfig.Builder
setCenterFreq0Mhz(centerFreq0: Int)

Sets the center frequency in MHz of the first segment of the channel.

ResponderConfig.Builder
setCenterFreq1Mhz(centerFreq1: Int)

Sets the center frequency in MHz of the second segment of the channel, if used.

ResponderConfig.Builder
setChannelWidth(channelWidth: Int)

Sets the channel bandwidth in MHz.

ResponderConfig.Builder
setFrequencyMhz(frequency: Int)

Sets the frequency of the channel in MHz.

ResponderConfig.Builder

Sets the Responder MAC Address.

ResponderConfig.Builder
setPreamble(preamble: Int)

Sets the preamble encoding for the protocol.

ResponderConfig.Builder
setResponderType(responderType: Int)

Sets the responder type, can be RESPONDER_AP or RESPONDER_STA or #RESPONDER_AWARE

Public constructors

Builder

Added in API level 33
Builder()

Public methods

build

Added in API level 33
fun build(): ResponderConfig

Build ResponderConfig given the current configurations made on the builder.

Return
ResponderConfig an instance of ResponderConfig This value cannot be null.

set80211azNtbSupported

Added in API level 35
fun set80211azNtbSupported(supports80211azNtb: Boolean): ResponderConfig.Builder

Sets an indication the access point can to respond to the IEEE 802.11az non-trigger based ranging protocol, but, if false, indicates only IEEE 802.11mc or one-sided Wi-Fi RTT is possible.

Parameters
supports80211azNtb Boolean: the ability to support the IEEE 802.11az non-trigger based ranging protocol
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

set80211mcSupported

Added in API level 33
fun set80211mcSupported(supports80211mc: Boolean): ResponderConfig.Builder

Sets an indication the access point can to respond to the two-sided Wi-Fi RTT protocol, but, if false, indicates only one-sided Wi-Fi RTT is possible.

Parameters
supports80211mc Boolean: the ability to support the Wi-Fi RTT protocol
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setCenterFreq0Mhz

Added in API level 33
fun setCenterFreq0Mhz(centerFreq0: Int): ResponderConfig.Builder

Sets the center frequency in MHz of the first segment of the channel.

Note: The frequency is used as a hint, and the underlying WiFi subsystem may use it, or select an alternate if its own connectivity scans have determined the frequency of the access point has changed.

Parameters
centerFreq0 Int: the center frequency in MHz of first channel segment Value is 0 or greater
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setCenterFreq1Mhz

Added in API level 33
fun setCenterFreq1Mhz(centerFreq1: Int): ResponderConfig.Builder

Sets the center frequency in MHz of the second segment of the channel, if used.

Note: The frequency is used as a hint, and the underlying WiFi subsystem may use it, or select an alternate if its own connectivity scans have determined the frequency of the access point has changed.

Parameters
centerFreq1 Int: the center frequency in MHz of second channel segment Value is 0 or greater
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setChannelWidth

Added in API level 33
fun setChannelWidth(channelWidth: Int): ResponderConfig.Builder

Sets the channel bandwidth in MHz.

Parameters
channelWidth Int: the bandwidth of the channel in MHz Value is android.net.wifi.ScanResult#CHANNEL_WIDTH_20MHZ, android.net.wifi.ScanResult#CHANNEL_WIDTH_40MHZ, android.net.wifi.ScanResult#CHANNEL_WIDTH_80MHZ, android.net.wifi.ScanResult#CHANNEL_WIDTH_160MHZ, android.net.wifi.ScanResult#CHANNEL_WIDTH_80MHZ_PLUS_MHZ, or android.net.wifi.ScanResult#CHANNEL_WIDTH_320MHZ
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setFrequencyMhz

Added in API level 33
fun setFrequencyMhz(frequency: Int): ResponderConfig.Builder

Sets the frequency of the channel in MHz.

Note: The frequency is used as a hint, and the underlying WiFi subsystem may use it, or select an alternate if its own connectivity scans have determined the frequency of the access point has changed.

Parameters
frequency Int: the frequency of the channel in MHz Value is 0 or greater
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setMacAddress

Added in API level 33
fun setMacAddress(macAddress: MacAddress): ResponderConfig.Builder

Sets the Responder MAC Address.

Parameters
macAddress MacAddress: the phyical address of the responder This value cannot be null.
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setPreamble

Added in API level 33
fun setPreamble(preamble: Int): ResponderConfig.Builder

Sets the preamble encoding for the protocol.

Parameters
preamble Int: the preamble encoding Value is android.net.wifi.ScanResult#PREAMBLE_LEGACY, android.net.wifi.ScanResult#PREAMBLE_HT, android.net.wifi.ScanResult#PREAMBLE_VHT, android.net.wifi.ScanResult#PREAMBLE_HE, or android.net.wifi.ScanResult#PREAMBLE_EHT
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.

setResponderType

Added in API level 34
fun setResponderType(responderType: Int): ResponderConfig.Builder

Sets the responder type, can be RESPONDER_AP or RESPONDER_STA or #RESPONDER_AWARE

Parameters
responderType Int: the type of the responder, if not set defaults to RESPONDER_AP Value is android.net.wifi.rtt.ResponderConfig#RESPONDER_AP, android.net.wifi.rtt.ResponderConfig#RESPONDER_STA, android.net.wifi.rtt.ResponderConfig.RESPONDER_P2P_GO, android.net.wifi.rtt.ResponderConfig.RESPONDER_P2P_CLIENT, or android.net.wifi.rtt.ResponderConfig.RESPONDER_AWARE
Return
ResponderConfig.Builder the builder to facilitate chaining builder.setXXX(..).setXXX(..). This value cannot be null.